Восстановление флешки (micro SD)

[Fantomas]

Теперь ответ dmesg другой

pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.48-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1034 SMP Fri Sep 8 14:31:14 BST 2017
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c6eb80, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @ba35b000 s25600 r8192 d23552 u57344
[ 0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1024 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=c7b0654e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940356K/970752K available (7168K kernel code, 484K rwdata, 2012K rodata, 1024K init, 778K bss, 22204K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c79034 ( 485 kB)
.bss : 0x80c7b000 - 0x80d3daa4 ( 779 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000023] Switching to timer-based delay loop, resolution 52ns
[ 0.000302] Console: colour dummy device 80x30
[ 0.001197] console [tty1] enabled
[ 0.001241] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001308] pid_max: default: 32768 minimum: 301
[ 0.001640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001682] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002581] Disabling cpuset control group subsystem
[ 0.002746] CPU: Testing write buffer coherency: ok
[ 0.002808] ftrace: allocating 22401 entries in 66 pages
[ 0.049261] CPU0: update cpu_capacity 1024
[ 0.049312] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.049373] Setting up static identity map for 0x100000 - 0x100034
[ 0.051262] CPU1: update cpu_capacity 1024
[ 0.051269] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.051958] CPU2: update cpu_capacity 1024
[ 0.051965] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.052635] CPU3: update cpu_capacity 1024
[ 0.052641] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.052730] Brought up 4 CPUs
[ 0.052903] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.052933] CPU: All CPU(s) started in HYP mode.
[ 0.052959] CPU: Virtualization extensions available.
[ 0.053783] devtmpfs: initialized
[ 0.064954] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.065267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.065329] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.065890] pinctrl core: initialized pinctrl subsystem
[ 0.066817] NET: Registered protocol family 16
[ 0.069067] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.077884] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.077933] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.078100] Serial: AMBA PL011 UART driver
[ 0.080024] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.080574] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.150102] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ 0.151955] SCSI subsystem initialized
[ 0.152132] usbcore: registered new interface driver usbfs
[ 0.152233] usbcore: registered new interface driver hub
[ 0.152348] usbcore: registered new device driver usb
[ 0.159071] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-09-12 15:21
[ 0.160469] clocksource: Switched to clocksource arch_sys_counter
[ 0.207645] VFS: Disk quotas dquot_6.6.0
[ 0.207757] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.207987] FS-Cache: Loaded
[ 0.208257] CacheFiles: Loaded
[ 0.220387] NET: Registered protocol family 2
[ 0.221318] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.221456] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.221667] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.221780] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.221847] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222084] NET: Registered protocol family 1
[ 0.222517] RPC: Registered named UNIX socket transport module.
[ 0.222550] RPC: Registered udp transport module.
[ 0.222577] RPC: Registered tcp transport module.
[ 0.222605] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.223565] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.225881] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.241898] FS-Cache: Netfs 'nfs' registered for caching
[ 0.242894] NFS: Registering the id_resolver key type
[ 0.242947] Key type id_resolver registered
[ 0.242975] Key type id_legacy registered
[ 0.245363] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.245509] io scheduler noop registered
[ 0.245540] io scheduler deadline registered (default)
[ 0.245838] io scheduler cfq registered
[ 0.251509] BCM2708FB: allocated DMA memory fad10000
[ 0.251560] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ 0.274094] Console: switching to colour frame buffer device 128x48
[ 0.288444] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.288698] vc-cma: Videocore CMA driver
[ 0.288814] vc-cma: vc_cma_base = 0x00000000
[ 0.288947] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.289096] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.289452] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.290179] vc-sm: Videocore shared memory driver
[ 0.305187] brd: module loaded
[ 0.314132] loop: module loaded
[ 0.314257] Loading iSCSI transport class v2.0-870.
[ 0.314912] usbcore: registered new interface driver smsc95xx
[ 0.315088] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.543278] Core Release: 2.80a
[ 0.547945] Setting default values for core params
[ 0.552633] Finished setting default values for core params
[ 0.757653] Using Buffer DMA mode
[ 0.762312] Periodic Transfer Interrupt Enhancement - disabled
[ 0.767047] Multiprocessor Interrupt Enhancement - disabled
[ 0.771775] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.776439] Dedicated Tx FIFOs mode
[ 0.781390] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ 0.786250] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.809906] dwc_otg: Microframe scheduler enabled
[ 0.809956] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8059063c
[ 0.814827] WARN::hcd_init_fiq:460: FIQ ASM at 0x805909ac length 36
[ 0.819627] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000
[ 0.824384] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.829068] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.833794] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.838487] Init: Port Power? op_state=1
[ 0.843124] Init: Power Port (0)
[ 0.847935] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857317] usb usb1: Product: DWC OTG Controller
[ 0.861964] usb usb1: Manufacturer: Linux 4.9.48-v7+ dwc_otg_hcd
[ 0.866671] usb usb1: SerialNumber: 3f980000.usb
[ 0.872195] hub 1-0:1.0: USB hub found
[ 0.876888] hub 1-0:1.0: 1 port detected
[ 0.882297] dwc_otg: FIQ enabled
[ 0.882302] dwc_otg: NAK holdoff enabled
[ 0.882306] dwc_otg: FIQ split-transaction FSM enabled
[ 0.882321] Module dwc_common_port init
[ 0.882570] usbcore: registered new interface driver usb-storage
[ 0.887511] mousedev: PS/2 mouse device common for all mice
[ 0.893167] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.898185] bcm2835-cpufreq: min=600000 max=1200000
[ 0.903382] sdhci: Secure Digital Host Controller Interface driver
[ 0.908261] sdhci: Copyright(c) Pierre Ossman
[ 0.913469] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ 0.920631] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.925657] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.933251] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.938468] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.943795] usbcore: registered new interface driver usbhid
[ 0.948837] usbhid: USB HID core driver
[ 0.954685] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[ 0.961149] [vc_sm_connected_init]: start
[ 0.970255] [vc_sm_connected_init]: end - returning 0
[ 0.975683] Initializing XFRM netlink socket
[ 0.980721] NET: Registered protocol family 17
[ 0.985795] Key type dns_resolver registered
[ 0.991124] Registering SWP/SWPB emulation handler
[ 0.996773] registered taskstats version 1
[ 1.008055] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 1.014716] sdhost: log_buf @ bad07000 (fad07000)
[ 1.090496] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.097654] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.100588] Indeed it is in host mode hprt0 = 00021501
[ 1.107692] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.187994] random: fast init done
[ 1.190596] of_cfs_init
[ 1.190679] of_cfs_init: OK
[ 1.203055] Waiting for root device PARTUUID=c7b0654e-02...
[ 1.217220] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.224215] mmc0: new high speed SDHC card at address 1388
[ 1.230054] mmcblk0: mmc0:1388 NCard 14.8 GiB
[ 1.236639] mmcblk0: p1 p2
[ 1.246382] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.253012] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.259525] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.267191] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.310498] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.315499] Indeed it is in host mode hprt0 = 00001101
[ 1.331340] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.336433] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.342241] devtmpfs: mounted
[ 1.382311] Freeing unused kernel memory: 1024K
[ 1.412891] mmc1: new high speed SDIO card at address 0001
[ 1.550814] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.555923] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.562068] hub 1-1:1.0: USB hub found
[ 1.567663] hub 1-1:1.0: 5 ports detected
[ 1.787945] systemd[1]: System time before build time, advancing clock.
[ 1.900541] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.912639] NET: Registered protocol family 10
[ 1.928019] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.970022] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.981049] systemd[1]: Detected architecture arm.
[ 2.004560] systemd[1]: Set hostname to <raspberrypi>.
[ 2.030848] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.036301] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.045634] smsc95xx v1.0.5
[ 2.154478] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:54:f0:45
[ 2.260526] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 2.395812] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c535
[ 2.401473] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.407074] usb 1-1.2: Product: Dell Wireless Mouse WM123
[ 2.412652] usb 1-1.2: Manufacturer: Logitech
[ 2.426414] input: Logitech Dell Wireless Mouse WM123 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C535.0001/input/input0
[ 2.438816] hid-generic 0003:046D:C535.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Dell Wireless Mouse WM123] on usb-3f980000.usb-1.2/input0
[ 2.457079] input: Logitech Dell Wireless Mouse WM123 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C535.0002/input/input1
[ 2.461240] systemd[1]: Listening on udev Control Socket.
[ 2.484000] systemd[1]: Listening on udev Kernel Socket.
[ 2.498227] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.513244] systemd[1]: Created slice User and Session Slice.
[ 2.528023] systemd[1]: Created slice System Slice.
[ 2.541090] hid-generic 0003:046D:C535.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Dell Wireless Mouse WM123] on usb-3f980000.usb-1.2/input1
[ 2.557051] systemd[1]: Reached target Slices.
[ 2.587740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.777237] i2c /dev entries driver
[ 2.850563] usb 1-1.3: new low-speed USB device number 5 using dwc_otg
[ 3.003151] usb 1-1.3: New USB device found, idVendor=062a, idProduct=0201
[ 3.003160] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.003167] usb 1-1.3: Product: USB-compliant keyboard
[ 3.019857] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:062A:0201.0003/input/input2
[ 3.081601] hid-generic 0003:062A:0201.0003: input,hidraw2: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-3f980000.usb-1.3/input0
[ 3.106434] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:062A:0201.0004/input/input3
[ 3.171314] hid-generic 0003:062A:0201.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-3f980000.usb-1.3/input1
[ 3.268904] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.425586] systemd-journald[135]: Received request to flush runtime journal from PID 1
[ 4.007354] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 4.329536] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 4.337448] usbcore: registered new interface driver brcmfmac
[ 4.533432] brcmfmac: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378
[ 5.198816] random: crng init done
[ 5.506655] uart-pl011 3f201000.serial: no DMA platform data
[ 6.041134] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
[ 6.064020] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.064034] brcmfmac: power management disabled
[ 6.532698] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 6.532919] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.088243] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9.937111] Bluetooth: Core ver 2.22
[ 9.937196] NET: Registered protocol family 31
[ 9.937201] Bluetooth: HCI device and connection manager initialized
[ 9.937222] Bluetooth: HCI socket layer initialized
[ 9.937235] Bluetooth: L2CAP socket layer initialized
[ 9.937268] Bluetooth: SCO socket layer initialized
[ 9.954332] Bluetooth: HCI UART driver ver 2.3
[ 9.954344] Bluetooth: HCI UART protocol H4 registered
[ 9.954350] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.954514] Bluetooth: HCI UART protocol Broadcom registered
[ 10.341437] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.341447] Bluetooth: BNEP filters: protocol multicast
[ 10.341467] Bluetooth: BNEP socket layer initialized
[ 10.441477] Bluetooth: RFCOMM TTY layer initialized
[ 10.441513] Bluetooth: RFCOMM socket layer initialized
[ 10.441551] Bluetooth: RFCOMM ver 1.11
[ 12.800111] fuse init (API version 7.26)
[ 2649.636015] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
[ 2649.766299] usb 1-1.4: New USB device found, idVendor=1908, idProduct=0226
[ 2649.766314] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2649.770256] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2649.771404] scsi host0: usb-storage 1-1.4:1.0
[ 2650.826824] scsi 0:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2
[ 2650.853107] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2651.477970] sd 0:0:0:0: [sda] 31342592 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 2651.478264] sd 0:0:0:0: [sda] Write Protect is off
[ 2651.478277] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 2651.478561] sd 0:0:0:0: [sda] No Caching mode page found
[ 2651.478570] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 2651.481612] sda: sda1
[ 2651.483888] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2652.048143] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2743.667068] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2774.367398] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2784.607514] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2801.247691] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2801.477716] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2812.127795] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
[ 2812.258083] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 2812.258122] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=0x00
[ 2812.258138] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 00 00 20 01 00 00 01 00
[ 2812.258148] blk_update_request: I/O error, dev sda, sector 8193
[ 2812.258158] Buffer I/O error on dev sda1, logical block 1, lost async page write
[ 2812.258213] sd 0:0:0:0: rejecting I/O to offline device
[ 2812.258226] sd 0:0:0:0: killing request


А вот ответ на fsck

pi@raspberrypi:~ $ fsck
fsck from util-linux 2.29.2
e2fsck 1.43.4 (31-Jan-2017)
/dev/mmcblk0p2 is mounted.



WARNING!!! The filesystem is mounted. If you continue you ***WILL***
cause ***SEVERE*** filesystem damage.


Do you really want to continue<n>? yes
fsck.ext4: Отказано в доступе while trying to open /dev/mmcblk0p2
You must have r/w access to the filesystem or be root

[Леший]

Да написал же уже, колнтроллер флехи в ридонли режиме, нужна утилита для разлочки, для этого нужно знать на каком таракане оно построено.

[Restart1566]

Теперь ответ dmesg другой

pi@raspberrypi:~ $ dmesg


pi@raspberrypi:~ $ fsck
fsck from util-linux 2.29.2
e2fsck 1.43.4 (31-Jan-2017)
/dev/mmcblk0p2 is mounted.

Привет!
Я же тебе написал команды в нужной последовательности.
Посмотри предыдущий мой ответ и повтори